Which closure fits which job?
Choose 711 aluminium clips for continuous-roll or mesh bags used in produce, bakery and snack packing. Choose 712 iron nails when that closure format suits the bag and product. Choose wire tying for continuous-roll or mesh bags on produce, wholesale-market and food lines where a wire tie is the required finish. These are different closure materials and mechanisms, not interchangeable consumables. Start with the finished bag format, then match the machine and its closure material.
The comparison below separates what each method does from what still needs confirming. It does not rank closure strength, output or service life: those results depend on the actual bag, consumable, setup and handling conditions. A bag-closing operation is also different from sealing the film itself. None of these method names establishes a hermetic seal or a shelf-life claim.
| Check | 711 aluminium clips | 712 iron nails | Wire tying |
|---|---|---|---|
| Function | Close the gathered bag neck with an aluminium clip. | Close the bag with a 712 iron nail. | Tie the gathered bag neck with wire. |
| Consumable | 711 aluminium clips. | 712 iron nails. | Matching tie wire. |
| Bag format | Continuous-roll bags and mesh bags. | Bags whose material and neck suit the nail closure; confirm the sample. | Continuous-roll bags and mesh bags. |
| Application | Produce, bakery and snack bags. | Bag-closing tasks requiring the 712 nail format. | Produce, wholesale markets and food lines. |
| Confirm with the buyer | Bag material, gathered neck, clip specification and handling. | Bag material, neck dimensions, nail specification and handling. | Bag material, gathered neck, wire specification and opening method. |
711 aluminium clips: produce, bakery and snack bags
The 711 closes continuous-roll bags and mesh bags with aluminium clips. It suits a workstation where filled bags are presented one after another and the required finish is a clipped neck. Produce, bakery and snack packing are the stated applications for this machine. Dingfeng also supplies the matching clips.
Confirm the bag construction and the gathered neck presented to the closing point. Mesh and continuous-roll bags do not necessarily form the same bundle of material. Check the filled bag, the space above the product and how the operator presents it. A specified clip format must match the machine; another clip that looks similar is not automatically compatible.
712 iron nails: select around the specified closure
The 712 closes bags with 712 iron nails. It is an option where that nail format suits the product and the requested bag finish. Its bag-closing workflow can be considered alongside the 711, but the two machines use different consumables. Dingfeng supplies the matching nails as well as the machine.
Confirm the intended bag material and neck dimensions rather than assuming every bag accepted by an aluminium-clip setup will work unchanged. The closure should be checked through the handling steps that matter to the buyer, including carrying, packing into outer containers and opening. No transport performance is promised here without checking the actual combination.
Wire tying: when the requested finish is a wire tie
The wire machine ties continuous-roll bags and mesh bags with wire. Its stated applications include produce, wholesale markets and food lines. It is the relevant method when the pack specification calls for wire rather than an aluminium clip or an iron nail. Matching wire is supplied with the machine.
Confirm the wire specification, the bag neck and the presentation method together. Then check the finished tie against the way the bag is handled and opened. Keep samples of both the bag and the closure when discussing replacements. To confirm a configuration, send the bag information and, if useful, a photograph with your inquiry. We usually reply within 12 hours.
